Tool Care Guide
Tool Care Guide
A considered approach to cleaning, drying, inspecting and storing the beauty tools that support your daily rituals. Use this guide alongside the instructions supplied with each product, adapting every step to its material, construction and intended use.
Four habits behind thoughtful tool care.
Never assume that every tool can be washed, soaked or disinfected in the same way. Product instructions should always take priority.
Clean with restraint
Remove visible residue using a method suited to the tool. Avoid harsh products, abrasive surfaces and prolonged soaking unless the manufacturer specifically recommends them.
Dry completely
Pat surfaces gently and allow tools to air-dry in a clean, ventilated place. Trapped moisture can affect handles, metal joints, brush ferrules and enclosed mechanisms.
Inspect before use
Look for chips, cracks, loose parts, worn cables, damaged bristles, sharp edges or changes in the surface. Do not continue using a tool that appears damaged.
Store with intention
Keep tools dry, protected and easy to identify. Separate clean and used items, protect delicate edges and avoid compressed storage that can bend bristles or strain cords.
A calm sequence for routine maintenance.
Care is most effective when it is consistent and uncomplicated. This sequence provides a general framework, but it should always be adjusted to the tool’s specific instructions.
Prepare the space
Begin with clean hands, a clear surface and any approved cloths or cleaning products.
Remove surface residue
Use gentle pressure and avoid forcing product deeper into seams, vents, joints or brush ferrules.
Clean by material
Choose a method suited to stone, glass, silicone, metal, bristles, ceramic or electrical components.
Dry without heat
Allow natural airflow where possible and avoid direct heat that may affect adhesives or finishes.
Inspect and return to storage
Confirm that the tool is clean, dry and undamaged before placing it in a protected area.
Different tools require different attention.
When a product has removable parts, charging ports, coatings or moving components, review its instructions before introducing water or cleaning solutions.
Facial rollers and gua sha tools
Wipe or wash according to the material, paying attention to joins and metal fittings. Avoid dropping stone or glass tools, and do not use them if chipped, cracked or roughened.
Makeup brushes and applicators
Clean bristles with the handle angled downward so water does not collect inside the ferrule. Reshape carefully and allow brushes to dry with enough airflow around the bristles.
Cleansing and pore-care devices
Remove detachable heads when instructed and clean only the parts identified as washable. Keep charging areas and non-waterproof components dry, and inspect textured surfaces for trapped residue.
Hair styling tools
Unplug and allow heated tools to cool completely before wiping them. Remove visible product buildup from plates, barrels, guards or comb attachments using only an approved method.
Manicure and grooming tools
Remove visible debris carefully, clean according to the tool material and dry hinges or moving joints thoroughly. Store sharp edges and pointed tips with appropriate protection.
Body massage and cooling tools
Clean all skin-contact surfaces after use and inspect textured areas, seams and handles. Follow the product instructions regarding refrigeration, temperature limits and exposure to water.
Care begins with understanding the surface.
Material can influence cleaning products, water exposure, drying time and storage. When uncertain, choose the gentlest approved method and contact Novellea before proceeding.
Stone and glass
Handle over a soft surface, avoid sudden temperature changes and inspect for chips or cracks before every use. Dry carefully to reduce slipping during handling.
Silicone and soft-touch surfaces
Clean grooves and textures thoroughly without abrasive scrubbing. Avoid oily residue, harsh solvents or storage conditions that leave the surface compressed.
Brush fibres and sponge applicators
Use gentle cleansing, rinse thoroughly where appropriate and allow complete air-drying. Replace items that remain damaged, misshapen or difficult to clean.
Metal, ceramic and coated finishes
Avoid abrasive pads and prolonged moisture. Inspect hinges, edges, coatings and joins, and dry every exposed area before closing or storing the tool.
Disconnect, cool and protect.
Hair styling tools, powered cleansing devices and other electrical beauty tools require additional care. Product-specific guidance should always take priority over general cleaning advice.
- Switch off, unplug or disconnect the tool before cleaning whenever applicable.
- Allow heated surfaces to cool fully before touching or wiping them.
- Keep plugs, charging ports and non-waterproof housings away from moisture.
- Never use a device with a damaged cable, cracked housing or unstable connection.
- Store cords loosely and avoid pulling, twisting or wrapping them tightly around the tool.
A protected place for every tool.
Storage should protect clean tools from dust, excess humidity, impact and cross-contact with used items.
Separate clean from used
Keep tools awaiting cleaning away from freshly maintained items. A divided tray, washable pouch or clearly designated area can help preserve a clean routine.
Create clear zonesProtect delicate shapes
Avoid pressure on brush bristles, stone edges, roller mechanisms, comb teeth and manicure tips. Use caps, sleeves or fitted compartments where appropriate.
Prevent bending and impactChoose a dry environment
Store tools only after they are fully dry. Avoid damp drawers, sealed containers with trapped moisture and direct sunlight that may affect finishes, plastics or adhesives.
Dry before closingA few useful care notes.
General answers for maintaining beauty tools with a gentle, material-aware approach.
How often should beauty tools be cleaned?
Can every beauty tool be washed with soap and water?
Can I place facial tools in the refrigerator?
How should makeup brushes be dried?
When should a beauty tool be replaced?
Does tool cleaning replace professional sanitization?
Keep every ritual clean, calm and prepared.
Explore Novellea beauty tools and care accessories, or contact Client Care for help with product-specific cleaning, storage and maintenance guidance. Standard shipping is estimated at 3–5 business days.